BLUETTI EB70 1000W Power Station – Pure Sine Inverter

SKU
EB70

The EB70 portable power station packs the 1000W AC inverter and 716Wh LiFePO4 battery, great for outdoor adventure, camping, hiking, fishing, emergency and much more.

$1,099.00

Stay Powered, Wherever Life Takes You

The EB70 portable power station packs the 1000W AC inverter and 716Wh LiFePO4 battery, great for outdoor adventure, camping, hiking, fishing, emergency and much more.

Stay Powered, Wherever Life Takes You

 

10 Outlets for All

Charge your devices as needed. BLUETTI EB70 is ready to charge your smartphones, tablets, lights, GoPros, refrigerators, coolers, projectors, etc.

10 Outlets for All

Power for Play

Powering a mobile theatre can't be easier. When camping or on a RV trip, bring EB70 and give kids a burst with excitement for a movie night.

Power for Play

Portability Brings Possibility

Weighing 9.7kg with a size of 32 x 21.6 x 22.1cm, the EB70 is undoubtedly able to go with you to parks, forests, riverside, coastlines, or wherever else you need electricity.

Portability Brings Possibility

BATTERY INFO

Capacity: 716Wh (22.4V, 32Ah)

Type: LiFePO4 (Lithium Iron Phosphate)

Life Cycles: 2,500+ Cycles to 80% Original Capacity

Shelf-life:  Recharge to 80% Every 3-6 Months

Management System: MPPT Controller, BMS, etc.

OUTPUT

AC Outlets: 2 x 220-240V AC Outlets, 1000W In Total

Inverter Type: Pure Sine Wave

Surge Power: 1,400W

USB-C Port: 2 x 100W Max.

USB-A Port: 2 x 5V/3A

12V DC Outlets: 1 x 12V/10A (Car Outlet) & 2 x 12V/10A (DC5521)

Wireless Charging Pad: 1 x 15W Max.

INPUT

AC Adapter Input: 200W Max.

Solar Input: 200W Max. OCV 12-28V, 8A

Car Input: 12/24V from Cigarette Lighter Port

RECHARGE TIMES

AC Adapter (200W): ≈4-4.5 Hours

Solar (200W): ≈4-4.5 Hours (With prime sunshine, ideal orientation, and low temperature)

12V/24V Car Outlet  (100W/200W): ≈7.5 or 4.0 Hours

GENERAL

Pass-through Charge: Yes

Weight:9.7 kg

Dimensions (LxWxD): 32 x 21.6 x 22.1cm

Operating Temperature: 20-40℃

Storage Temperature: -10-45℃

Tested Certifications: CEC, DOE, FCC, QC3.0, CA Prop 65

Warranty: 24 Months

 

In the Box

BLUETTI EB70 1000W Power Station – Pure Sine Inverter

  • 1000W AC Pure Sine Wave Inverter (1,400W Surge)
  • 716Wh Capacity
  • LiFePO4 Battery with 2,500+ Life Cycles to 80%
  • 10 Outputs For Multiple Devices
  • 4 Ways to Recharge (AC/Solar/Car/Generator)
  • 200W Max. Solar Input
  • Eco-friendly/Gas free/Quiet/Cost-effective

Q1: How do I know whether my appliance can work well with the EB70?

Calculate the total wattage of your devices. EB70 should work if the load doesn't exceed its rated 1000W.

Friendly Note: For some devices with motor / compressor built inside, the instant start-up power may be 2-4 times more than the rated power, which may exceed the upper limit of the EB70.

 

Q2: How long will EB70 power my device?

Working time (estimation) = 716Wh* 0.85 / operating power of your device. (0.85=Conversion Rate)

Please note that the actual working time may vary under different situations.

 

Q3: Can I use third party solar panels?

PV input requirements for EB70:

1) Open Circuit Voltage (OCV) between 12V-28V; MAX input current: 8A; Input Power: 200W Max.

2) Equipped with MC4 Connector. If your panel has an Anderson connector, please purchase Anderson to MC4 cable, separately. You can click to buy Anderson to MC4 cable.

Best Companion:

  • 1*BLUETTI PV200 (200W), fully recharge from 0-100% ≈4hrs*.
  • 1*BLUETTI PV120 (120W), fully recharge from 0-100% ≈6.5hrs*.

Friendly Note: The actual charging time depends on the weather, solar condition, and the angle of the solar panels.


Q4: Can it charge and discharge simultaneously?

Yes, the EB70 supports pass-through charging; equipped with the premium LiFePO4 battery and the advanced Battery Management System, just feel free to use it the way that better suits your needs.

 

Q5: How long can it run my device?

Running time = Battery capacity × DoD × η ÷ Device rated power

DoD refers to Depth of Discharge and η is local inverter efficiency.

For EB70, both DoD and η are 90%. If you run a 500W blender with it, the running time will be: 716Wh × 90% × 90% ÷ 500W ≈ 1.2hrs

Note:

  • The formula is NOT suitable for inductive loads with compressors, like refrigerator, air conditioner, etc.
  • The above data is for reference ONLY   

 

Q6: What is the maximum input charging power of the BLUETTI EB70?

 200W Max.

 

Q7: Is the EB70 power station waterproof

No. Also, please do NOT store it in a humid environment for a long time.

 

Q8: Can I use or charge EB70 in sub-zero temperatures?

Temperature ranges for EB70S are:

  • Charge: 0-40℃ (32-104℉);
  • Discharge: -20-40℃ (-4-104℉);
  • Storage: -20-40℃ (-4-104℉).

Technically, it can power electrical devices under such situations, but please avoid charging it.

 

Q9: Can it be laid on its side to save space?

No. Long-term placement will make the internal structure loose, it is recommended to place the machine upright.

 

Q10: Does EB70 support BLUETTI App control?

No.

 

Q11: Can I expand its capacity by connecting with B230/B300 battery?

No.

 

Q12:  Is the solar charge controller mode MPPT or PWM?

MPPT.

 

Add on Items:

  • PNV120 and PV200 solar Panels.
  • Bluetti carry bag - $59
© 2024 SatPhone Shop Pty Ltd. All Rights Reserved. | Subsidiary of

Beam Communications Holdings Limited

Top