BEAM MG400 LTE Gateway

SKU
MG400

The Beam MG400 LTE Gateway (4G LTE Cat 13) is a reliable high-quality grade router for industrial and vehicular environments.  It is designed to meet solutions that require high-speed and reliable data connectivity where connections may be unavailable or unsuitable for the application. Dual Sim capability allows an always on connection by using 2 networks.

SPS Special
$895.00
(*)Required Fields

Vibration and shock resistant, the MG400 is ideal for all types of transportation, whether used in industrial mining to the latest automobile technology.
It is also designed to withstand freezing to super hot temperatures and harsh environments, ensuring that the device will continue to operate under extreme conditions

It delivers high-speed 4G LTE (Cat 13) and Wi-Fi virtually anywhere, offering fast connectivity to upload large data and provides high-performance.
The Beam MG400 enables WAN connectivity for moving vehicles and delivers reliable bi-directional communication for other on-board electronic devices. Intelligent network monitoring allows Beam MG400 to re-connect automatically or fail over to an alternative SIM.

Key Features

• 4G LTE Category 13 (up to 391Mbps DL) with failover to 3G
• Dual Wi-Fi
• Dual SIM
• Integrated GPS (optional GPS antenna)
• 3 Gigabit Ethernet ports
• I/O and RS232 ports to read and control remote sensors and equipment
• Wi-Fi access point and hotspot functionality
• Industrial design for harsh environments - land and maritime (fixed and mobile)
• Tough environmental specs
• Ignition sense and a wide range of input voltages for vehicle and boat installations
• Optional high gain antennas for increased coverage

Device Interface

•  LTE Module: 1*LTE-Cat.13, 2*SIM, with GNSS

•  Ethernet: 3*RJ45 GE

•  WiFi: 1*11n-2*2 , 1*11ac-2*2 High Power

•  Field Bus: 1*RS232 (TX/RX)

•  Log Storage: 1*USB

•  Power Input: 1* DC 9V ~ 36V (Terminal Block)

•  Antenna Con. : 2*SMA (F)-LTE, 2*SMA(M)-WiFi, 1* SMA(F)-GPS

 

WAN & Uplink

•  WAN: Cellular & Config. Ether-WAN;  Failover, Load Balance   

•  Cellular: 3GPP, 3G/LTE, IP Pass-through, IPv4/6

•  Ether-WAN: Dynamic IP, Static IP, PPPoE, PPTP, L2TP

•  Network Monitor: ICMP/DNS Query

•  WiFi Uplink: Auto AP scan, profile for APs link priority  

 

WiFi

•  Standard: 802.11 Industry Compliance

•  Mode: AP Router, WDS, WDS Hybrid Modes

•  Functions: Multi-SSID, WMM

•  Security: WEP, WPA,WPA2, WPA-PSK, WPA2-PSK, 802.1x

•  Captive Portal: External & Internal web portal

 

ENVIRONMENT SPECIFICATIONS

 

Temperature

•  Operating Range: -30 to + 70 Degrees °C 

•  Storage: -40 to +85 Degrees °C 

•  Humidity: 10%~95% (non condensing)

 

PHYSICAL SPECIFICATIONS

 

Dimensions & Weight

•  Dimensions without bracket: 160 x 125 x 47 mm

•  Dimensions with bracket: 200 x 125 x 48 mm

•  Outer Box: 278 x 247 x 66 mm

•  Weight: 965 grams

 

Certifications

•  EMC: EN 55032, ETSI EN 301 489-1, ETSI EN 301 489-17, EN 301489-52

•  Radio: ETSI EN 300 328, ETSI EN 301 893, AS/ACIF S042.1& AS/CA S042.4

•  Safety: AS/NZS 2772.2, IEC62368

• 1 x MG400 Gateway LTE

• 2 x Cellular Antennas

• 2 x WiFi Antenna

• 1 x Terminal Block ( 8-pin for DC Power, IGN, DI/DO, RS232)

• 2 x Mounting Brackets

• 1 x Screw Bag

• 1 x spare device label

• 1 x AC power adapter with AU plug

• 1 x fused DC power cable with IGN (ignition wire)

• Quick Start Guide

For more information on the BEAM MG400 LTE Gateawy please download the following:

BEAM MG Series Brochure

BEAM MG400 Gateway Quick Start Guide

BEAM MG400 Gateway Brochure

BEAM MG400 Gateway Manual

© 2020 SatPhone Shop Pty Ltd. All Rights Reserved. | Subsidiary of

Beam Communications Holdings Limited

Top