Beam LTE Marine Bundle 10m Cable
The Beam LTE Marine Bundle includes the Beam MG200 LTE Gateway Kit with the Beam LTE710 Stick Antenna. The LTE710 Stick Antenna is splash-, rust-, and weather-proof, specifically designed to withstand the marine environment. This high gain omni-directional antenna is ideal to get the best possible coverage at sea (e.g. near coast vessels). The antenna can also be deployed for land applications and M2M/IoT installations.
The Beam LTE Marine Bundle includes the Beam MG200 LTE Gateway Kit with the Beam LTE710 Stick Antenna. The LTE710 Stick Antenna is splash-, rust-, and weather-proof, specifically designed to withstand the marine environment. This high gain omni-directional antenna is ideal to get the best possible coverage at sea (e.g. near coast vessels). The antenna can also be deployed for land applications and M2M/IoT installations.
MG200 Marine 10 (MG200-MB10):
- Beam MG200 LTE Gateway Kit
- Beam LTE710 Stick Antenna
- Beam LTE932 10m Cable
- LTE141 Mast/Rail Mount Bracket
MG200 SPECIFICATIONS
Device Interface
• LTE Module: 1*LTE-Cat.13, 2*SIM, with GNSS
• Ethernet: 3*RJ45 GE
• WiFi: 1*11n-2*2 , 1*11ac-2*2 High Power
• Field Bus: 1*RS232 (TX/RX)
• Log Storage: 1*USB
• I/O: 2*DI (“Logic 0”: 0~1V, “Logic 1”: 5V~30V),1*DO (Relay Mode, maximum voltage is 36V)
• Power Input: 1* DC 9V ~ 36V (Terminal Block)
• Antenna Con: 2*SMA (F)-LTE, 2*SMA(M)-WiFi, 1* SMA(F)-GPS
WAN & Uplink
• WAN: Cellular & Config. Ether-WAN; Failover, Load Balance
• Cellular: 3GPP, 3G/LTE, IP Pass-through, IPv4/6
• Ether-WAN: Dynamic IP, Static IP, PPPoE, PPTP, L2TP
• Network Monitor: ICMP/DNS Query
• WiFi Uplink: Auto AP scan, profile for APs link priority
WiFi
• Standard: 802.11 Industry Compliance
• Mode: AP Router, WDS, WDS Hybrid Modes
• Functions: Multi-SSID, WMM
• Security: WEP, WPA,WPA2, WPA-PSK, WPA2-PSK, 802.1x
• Captive Portal: External & Internal web portal
Temperature
• Operating Range: -30 to + 70 Degrees °C
• Storage: -40 to +85 Degrees °C
• Humidity: 10%~95% (non condensing)
Dimensions & Weight
• Dimensions without bracket: 160 x 125 x 47 mm
• Dimensions with bracket: 200 x 125 x 48 mm
• Outer Box: 278 x 247 x 69 mm
• Weight: 965 grams
Certifications
• EMC: EN 55032, ETSI EN 301 489-1, ETSI EN 301 489-17, EN 301489-52
• Radio: ETSI EN 300 328, ETSI EN 301 893, AS/ACIF S042.1& AS/CA S042.4
• Safety: AS/NZS 2772.2, IEC62368
LTE710 BEAM MARINE HIGH GAIN CELLULAR ANTENNA
Physical
• Colour: White and Chrome
• Materials: UV Protected PC, PTFE, PE and chromed solid brass
• Mount: On 1 threaded pole or bracket (LTE141, LTE191)
• Survival Wind Speed: 55 m/s (125 mph)
• Mounting Place: On mast or deck
Dimension & Weight
• Antenna: 478mm
Specifications
• Operating: -55° to +70°
• Frequency & Bandwidth (MHz):
| * 450 - 470 MHz, 698 - 960 MHz |
| * 1427 - 1518 MHz, 1710 -2170 MHz |
| * 2500 - 2690 MHz, 3300 - 3800 MHz |
• Antenna Type: End-fed 1/2 λ dipole - no groundplane needed
• Impedance: 50 ohm
• V.S.W.R:
| * < 3.0:1 (450 - 470 / 790 - 960 MHz) |
| * < 2.5:1 (1427- 2690 MHz/ 3300 - 3800 MHz) |
• Polarisation: Vertical
• Gain:
| * 3 dB (Marine), 0 dBd |
| * 2.15 dBi (450-470/698-960 MHz) |
| * 6 dB (Marine),3 dBd, 5.15 dBi |
| * 10 dB (Marine), (1427-1518/1710-2170 MHz) |
| * 7 dBd, 9.15 dBi (2412-2690/3300-3800 MHz) |
• Radiation Pattern: Omni-directional
• Max. Input Power: 40 W
MG200 Marine 10 (MG200-MB10)
- 1 x Beam MG200 LTE Gateway
- 2 x Cellular Antennas
- 2 x Wi-Fi Antenna
- 1 x Terminal Block (2-pin for DC Power)
- 2 x Mounting Brackets
- 1 x Screw Bag
- 1 x Din Rail Bracket with Screws
- 1 x Spare Device Label
- 1 x AC power Adapter with AU Plug
- 1 x Fused Power Cable
- 4 x Rubber Feet
- 1 x MG200 LTE Gateway Quick Start Guide
- 1 x Beam LTE710 Stick Antenna
- 1 x Beam LTE932 10m Cable
- 1 x LTE141 Mast/Rail Mount bracket
- 1 x Beam LTE Marine Bundle Installation Guide
Key Features
- Simple and affordable high-speed connectivity
- 4G LTE Category 13 (up to 391Mbps DL) with failover to 3G
- Dual SIM failover protection
- Integrated GPS (optional GPS antenna)
- Wi-Fi access point and hotspot functionality
- Industrial design for marine environments
- Onmi-directional high gain antenna for increased coverage
- Vibration and shock resistant
For more information please download the following:
BEAM LTE Bundle Series Brochure
BEAM MG Series Brochure
BEAM MG200 Gateway Quick Start Guide
BEAM MG200 Manual
Beam LTE Marine Bundle Installation Guide
Beam LTE Marine Bundle Brochure